-
-
-
-
-
Service Support
Gdko3 type electric control box has two types: monitoring and full-automatic. It is applicable to the 40MPa double line terminal dry oil centralized lubrication system. It is used to control the coordinated work of the lubrication pump, reversing valve, grease replenishing pump, etc. it can automatically supply oil to the oil supply points in the system. After the oil supply is completed, it will automatically stop. When the liquid level in the oil tank is lower than a certain limit, the grease replenishing pump will start automatically and stop automatically after filling with oil.
Key Word:
Electric control box | tyre repair pump | hydraulic equipment
Category:
Product Description
1、 Overview
Gdko3 type electric control box has two types: monitoring and full-automatic. It is applicable to the 40MPa double line terminal dry oil centralized lubrication system. It is used to control the coordinated work of the lubrication pump, reversing valve, grease replenishing pump, etc. it can automatically supply oil to the oil supply points in the system. After the oil supply is completed, it will automatically stop. When the liquid level in the oil tank is lower than a certain limit, the grease replenishing pump will start automatically and stop automatically after filling with oil.
This control box can send out fault signals such as "extended oil supply time", "empty oil reservoir", "overload operation", etc. It has continuous, manual and automatic control working states, which can be switched through the change-over switch on the box surface. Continuous working state: when the lubricating pump is started, it continuously supplies lubricating grease to the two main lines of the system; Manual working state: when the interlocking signal with the main engine is connected, the lubricating pump is manually started to feed the lubricating grease to the steering system, and the automatic reversing is automatically stopped after one lubrication cycle is completed; Automatic working state: when the interlocking signal with the main engine is connected, the lubricating pump will supply lubricating grease to the system at regular intervals according to the time interval set by the system, and it will automatically stop after completing a lubrication cycle. No matter what state the lubricating pump is in, once the oil reservoir is empty, the grease replenishing pump will automatically start to replenish grease and stop automatically after replenishing.
2、 Overall dimensions
3、 Sign symbols and words
| Serial number |
Symbol
|
Nameplate text
|
Serial number
|
Symbol
|
Nameplate text
|
Serial number
|
Symbol
|
Nameplate text
|
|
1
|
HL1
|
Work preparation instructions
|
6
|
HL6
|
System overpressure
|
11
|
SB4
|
Refueling pump start
|
|
2
|
HL2
|
Working state of line I
|
7
|
HL7
|
Pump motor overload
|
12
|
SB5
|
Refueling pump stop
|
|
3
|
HL3
|
Working state of line II
|
8
|
HL8
|
Oil reservoir empty
|
13
|
SB3
|
Fault reset
|
|
4
|
HL4
|
Refueling pump operation
|
9
|
SB1
|
Lubrication pump start
|
14
|
SA1
|
Automatic / manual / continuous
|
|
5
|
HL5
|
Monitoring time exceeds
|
10
|
SB2
|
Lubrication pump stop
|
15
|
SA2
|
Off / bell / on
|
RELATED PRODUCTS
CONSULTING PRODUCTS
Official QR code
Copyright © 2022 Nantong Bonan lubricating hydraulic equipment Co., Ltd